Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

Use this guide to replace the assembly bar.

Parçalar

Hiçbir parça belirtilmedi.

  1. Unscrew the screw holding the shoe in on the back side:
    • Unscrew the screw holding the shoe in on the back side:

    • One 8 mm Torx T5 screw

  2. Begin to remove  rubber sleeve. You may have to use some force as it has a tight fit. Indicated in the photo below is the rubber sleeve removed.
    • Begin to remove rubber sleeve. You may have to use some force as it has a tight fit.

    • Indicated in the photo below is the rubber sleeve removed.

  3. After sleeve is removed begin to remove the six screws on the back of the device.
    • After sleeve is removed begin to remove the six screws on the back of the device.

    • Six Torx T5 Screws

  4. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  5. Using a screw driver begin to unscrew the 4 screws on the top. There will be two screws on each side of the device.
    • Using a screw driver begin to unscrew the 4 screws on the top. There will be two screws on each side of the device.

    • Four Torx T5 Screws

  6. Remove the backside panel to expose the internal components.
    • Remove the backside panel to expose the internal components.

  7. Unscrew the four T5 Torx screws that are holding the assembly bar in place.
    • Unscrew the four T5 Torx screws that are holding the assembly bar in place.

  8. After all screws removed, the assembly bar can be removed and replaced with ease.
    • After all screws removed, the assembly bar can be removed and replaced with ease.

Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 14

Her zaman: 151