Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

This guide will cover how to remove the screen of a Samsung ATIV Book 9 Plus.

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the ten 4.3mm Phillips #00 screws from the bottom cover of the laptop. Remove the ten 4.3mm Phillips #00 screws from the bottom cover of the laptop.
    • Remove the ten 4.3mm Phillips #00 screws from the bottom cover of the laptop.

  2. Press the button to release the bottom cover. Press the button to release the bottom cover. Press the button to release the bottom cover.
    • Press the button to release the bottom cover.

  3. Remove the five 4.3mm Phillips #00 screws from the battery. Remove the five 4.3mm Phillips #00 screws from the battery.
    • Remove the five 4.3mm Phillips #00 screws from the battery.

  4. Lift the battery with both hands and remove. Lift the battery with both hands and remove.
    • Lift the battery with both hands and remove.

  5. Essential Electronics Toolkit

    Small Toolkit. Big Possibilities.

    Shop Toolkits

    Essential
    Electronics
    Toolkit

    Shop Toolkits
  6. Disconnect the display cable from the motherboard. Disconnect the display cable from the motherboard. Disconnect the display cable from the motherboard.
    • Disconnect the display cable from the motherboard.

  7. Disconnect the black and white antenna cables from the Wi-Fi card. Disconnect the black and white antenna cables from the Wi-Fi card.
    • Disconnect the black and white antenna cables from the Wi-Fi card.

  8. Remove the five 4mm Phillips #00 screws from the motherboard retaining brackets. Remove the five 4mm Phillips #00 screws from the motherboard retaining brackets.
    • Remove the five 4mm Phillips #00 screws from the motherboard retaining brackets.

  9. Remove the eight silver 4.2mm Phillips #00 screws from the corner. Remove the eight silver 4.2mm Phillips #00 screws from the corner.
    • Remove the eight silver 4.2mm Phillips #00 screws from the corner.

  10. Pry up the metal hinges from the laptop. Pry up the metal hinges from the laptop. Pry up the metal hinges from the laptop.
    • Pry up the metal hinges from the laptop.

  11. Place the screen on its back side and hold the battery-side of the laptop. In an upward motion, remove the back set off and set it aside. Place the screen on its back side and hold the battery-side of the laptop. In an upward motion, remove the back set off and set it aside. Place the screen on its back side and hold the battery-side of the laptop. In an upward motion, remove the back set off and set it aside.
    • Place the screen on its back side and hold the battery-side of the laptop. In an upward motion, remove the back set off and set it aside.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Sean Kim

Üyelik tarihi: 12-04-2018

616 İtibar

4 adet Kılavuz yazıldı

Takım

UW Tacoma, Team S1-G2, Liner Spring 2018 UW Tacoma, Team S1-G2, Liner Spring 2018 üyesi

UWT-LINER-S18S1G2

5 Üyeler

4 adet Kılavuz yazıldı

Bir Yorum

There’s no need to remove the battery. Just disconnect its power socket if you want to be ‘careful’.

Steerpike - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 13

Her zaman: 240