Giriş

Follow this guide to remove a dead battery and replace it with a new one.

Parçalar

Hiçbir parçaya gerek yok.

  1. Gently place the instrument upside-down on a soft surface.
    • Gently place the instrument upside-down on a soft surface.

    • Locate the battery cavity cap and screws.

  2. Use a phillips head screwdriver to unscrew both screws. Two #1 1mm long screws.
    • Use a phillips head screwdriver to unscrew both screws. Two #1 1mm long screws.

  3. Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. Remove the cap by lifting upwards to reveal the battery. Remove the cap by lifting upwards to reveal the battery.
    • Remove the cap by lifting upwards to reveal the battery.

  5. Gently lift the battery from the cavity. Detach the battery completely by firmly pulling the fabric connector from the conducting end of the battery. Detach the battery completely by firmly pulling the fabric connector from the conducting end of the battery.
    • Gently lift the battery from the cavity.

    • Detach the battery completely by firmly pulling the fabric connector from the conducting end of the battery.

Sonuç

To reassemble your device, follow these instructions in reverse order with a fresh battery.

Bir başkası bu kılavuzu tamamladı.

Chris Pittner

Üyelik tarihi: 11-01-2013

163 İtibar

7 adet Kılavuz yazıldı

Takım

Cal Poly, Team 5-18, Forte Winter 2013 Cal Poly, Team 5-18, Forte Winter 2013 üyesi

CPSU-FORTE-W13S5G18

4 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 5

Her zaman: 905