Giriş
The gasket of the brewing unit has to withstand heavy usage. Especially the large O-Ring on the piston needs replacing from time to time. Follow this guide to replace the gasket.
The pictures are taken from a Saeco Minuto, but the brewing unit is the same.
Neye ihtiyacın var
-
-
-
Take this opportunity to carefully replace the two O-rings on the support valve. The larger one is at the top. These two seals are stressed during every brewing process. Therefore, lubricate them with food-safe silicone grease.
-
On some models, the support valve is covered. In this case, you must unscrew the cover first.
-
Follow the steps in reverse order to reassemble your device.
Follow the steps in reverse order to reassemble your device.
Bu çevirmenlere özel teşekkürler:
100%
Bu çevirmenler dünyayı onarmamıza yardım ediyor! Katkıda bulunmak ister misiniz?
Çeviriye Başlayın ›