Ana içeriğe geç

Giriş

Follow these steps to replace the fuser unit by taking off the back cover of your Samsung CLP-300.

Parçalar

Hiçbir parça belirtilmedi.

  1. Turn the printer off and wait a few minutes for it to cool. Turn printer around so that you are looking at the rear panel.
    • Turn the printer off and wait a few minutes for it to cool.

    • Turn printer around so that you are looking at the rear panel.

  2. Open back of printer by pushing down handle.
    • Open back of printer by pushing down handle.

  3. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  4. Remove the four screws that attach the fuser unit to the printer. Remove the four screws that attach the fuser unit to the printer.
    • Remove the four screws that attach the fuser unit to the printer.

  5. Slide fuser unit out of the printer. Remove packaging from new fuser unit.
    • Slide fuser unit out of the printer.

    • Remove packaging from new fuser unit.

    • Insert new fuser unit.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Heather Howard

Üyelik tarihi: 15-10-2014

466 İtibar

4 adet Kılavuz yazıldı

Takım

University of Maine, Team 1-1, Diaz Fall 2014 University of Maine, Team 1-1, Diaz Fall 2014 üyesi

UMAINE-DIAZ-F14S1G1

3 Üyeler

4 adet Kılavuz yazıldı

Bir Yorum

how do you unplug the old fuser unit and plug in the new fuser unit - you don’t show how to do that.

Dianne Martin - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 5

Son 7 Gün: 34

Son 30 Gün: 154

Her zaman: 6,626