Menü

Ayarlarınız

Tezgahım

Cihazlarınız için kılavuz, parça ve cevaplara hızlı erişim edinin
Sepetim

Sepetiniz boş görünüyor

Mağazamıza Göz Atın

Samsung Captivate Glide Motherboard Replacement

Yazan: Nicholas Mira (ve 4 başka katılımcı)
  • Yorumlar: 0
  • Favoriler: 2
  • Tamamlanma: 1

Zorluk

Kolay

Adımlar

8

Gerekli Süre

20 dakika

Bölümler

1

İşaretler

1

Slice and Dice

Dilim ve Zar

Bu kılavuzdaki adımlar bölünerek bir dizi önkoşul kılavuzu olarak düzenlenmelidir.

Giriş

How to remove the motherboard of a Samsung Captivate Glide.

Aletler

Bu aletleri satın al

Parçalar

Hiçbir parçaya gerek yok.

  1. Remove back cover using fingernail or plastic opening tool. The cover pulls up and off. Remove back cover using fingernail or plastic opening tool. The cover pulls up and off. Remove back cover using fingernail or plastic opening tool. The cover pulls up and off.

    • Remove back cover using fingernail or plastic opening tool. The cover pulls up and off.

    Düzenle

  2. Remove battery with plastic opening tool or finger. Remove battery with plastic opening tool or finger.

    • Remove battery with plastic opening tool or finger.

    Düzenle

  3. Remove the seven screws from backplate using the #00 screwdriver. Remove the seven screws from backplate using the #00 screwdriver.

    • Remove the seven screws from backplate using the #00 screwdriver.

    Düzenle

  4. Pro Tech Toolkit içeren veya $100,00tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın

  5. Remove the back plate using the plastic opening tool. There is a lip on each side, and both must be pried up. You can work your way around the edges after prying the two sides.

    • Remove the back plate using the plastic opening tool.

    • There is a lip on each side, and both must be pried up.

    • You can work your way around the edges after prying the two sides.

    Düzenle

  6. Use the plastic opening tool to detach the two tabs connecting the motherboard to the base of the phone. Use the plastic opening tool to detach the two tabs connecting the motherboard to the base of the phone.

    • Use the plastic opening tool to detach the two tabs connecting the motherboard to the base of the phone.

    Düzenle

  7. Disconnect the antenna cable from the motherboard using tweezers.

    • Disconnect the antenna cable from the motherboard using tweezers.

    Düzenle

  8. Remove the single screw connecting the motherboard to the base of the phone by using the #00 Phillips screwdriver.

    • Remove the single screw connecting the motherboard to the base of the phone by using the #00 Phillips screwdriver.

    Düzenle

  9. Lift the motherboard out of the base of the phone. Lift the motherboard out of the base of the phone.

    • Lift the motherboard out of the base of the phone.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

4 tane daha katılımcı ile

Nicholas Mira

Üyelik tarihi: 23-09-2014

280 İtibar

2 adet Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Takım

USF Tampa, Team 5-3, Mcgee Fall 2014 USF Tampa, Team 5-3, Mcgee Fall 2014 üyesi

USFT-MCGEE-F14S5G3

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 2

Her zaman: 540