Parçalar

Hiçbir parçaya gerek yok.

Open the tray by pressing the eject button
  • Open the tray by pressing the eject button

  • Remove the DVD tray faceplate by pushing the faceplate up off of the tray.

Yorum Ekle

Press the eject button to insert the tray
  • Press the eject button to insert the tray

  • After the tray is closed unplug DVD player

Yorum Ekle

  • Unscrew the 3 screws in the back.

Yorum Ekle

  • Pull the outer case upward and then towards you.

Yorum Ekle

  • There are six symmetrically placed tabs holding in the front faceplate. Unhook these six tabs to loosen the faceplate.

Yorum Ekle

  • Pull off front faceplate. This may take a couple of tries to get all six tabs unhooked simultaneously.

Yorum Ekle

  • Locate the white clip that attaches the cord to the motherboard

  • Grasp clip and squeeze to release

  • Lift up and remove power cord

  • Slide cord mount from outer case

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 başka kişi bu kılavuzu tamamladı.

Evan Domingue

Üyelik tarihi: 28-01-2011

398 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 3-30, Regan Winter 2011 Cal Poly, Team 3-30, Regan Winter 2011 üyesi

CPSU-REGAN-W11S3G30

4 Üyeler

8 adet Kılavuz yazıldı

Bir Yorum

where can I get a replacement cord?

Bill Cavanaugh - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 12

Her zaman: 2,746