Giriş

You will need to find a clean area to work in and have the necessary tools. Follow this guide to gain access to your cellphone's input jack module.

Parçalar

Hiçbir parçaya gerek yok.

    • Remove the back battery cover.

  1. Remove the phone's battery.
    • Remove the phone's battery.

  2. Remove six (4.28 x 1.25)mm screws.
    • Remove six (4.28 x 1.25)mm screws.

  3. Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. Use the spudger to gently pry the silver plastic back plate from the body of the phone. Use the spudger to gently pry the silver plastic back plate from the body of the phone.
    • Use the spudger to gently pry the silver plastic back plate from the body of the phone.

  5. Peel off the Identification sticker
    • Peel off the Identification sticker

  6. Pop the red hinged-release lever away from its ribbon, then slide the ribbon out.
    • Pop the red hinged-release lever away from its ribbon, then slide the ribbon out.

  7. Pop the speaker plug out of its socket.
    • Pop the speaker plug out of its socket.

  8. Peel the button sensor off the top of the case.
    • Peel the button sensor off the top of the case.

  9. Peel the Input jack assembly out of the case.
    • Peel the Input jack assembly out of the case.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Sven

Üyelik tarihi: 18-04-2011

40 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 15-11, Regan Spring 2011 Cal Poly, Team 15-11, Regan Spring 2011 üyesi

CPSU-REGAN-S11S15G11

5 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 4

Her zaman: 1,363