Samsung Galaxy Gear Display Housing Replacement

Giriş

To access the interior of the device, the housing that contains the display needs to be removed. This guide will act as a prerequisite for all other guides.

Neye ihtiyacın var

Adım 1 Display Housing

Samsung Galaxy Gear Display Housing Replacement, Display Housing: adım 1, 1 resimden 1.

Use a T5 Torx screwdriver to remove the four 4.0 mm screws on the back of the device.
Be sure your device is turned off.

Düzenle

Adım 2

Use a plastic opening tool to separate the display housing from from the device.
To ensure you don't damage your device, insert the opening tool and slide it the entire length of the gap on both sides of the device.

Düzenle

Adım 3

Gently pry back the metal flap on top of the connector.
Locate the two 2.0 mm black screws and unscrew using a Phillips PH00 bit. The connector will detach from the device.

Düzenle