Ana içeriğe geç

Giriş

Prereq guide only! Removes the top midframe, which includes the charging coil, for the Samsung Galaxy S10+.

  1. Remove the nine 4 mm Phillips screws securing the top midframe to the phone.
    • Remove the nine 4 mm Phillips screws securing the top midframe to the phone.

  2. The midframe is still held in place by a few plastic clips around the edge. Insert the point of a spudger into the notch on the right edge of the midframe, near the Bixby button.
    • The midframe is still held in place by a few plastic clips around the edge.

    • Insert the point of a spudger into the notch on the right edge of the midframe, near the Bixby button.

    • Pry up to loosen the midframe from the phone.

  3. Insert the point of a spudger into the notch on the left edge of the phone, located near the power button. Pry up to loosen the midframe from the phone.
    • Insert the point of a spudger into the notch on the left edge of the phone, located near the power button.

    • Pry up to loosen the midframe from the phone.

  4. Lift the midframe from the top corners and remove it from the phone.
Sonuç

To reassemble your device, follow these instructions in reverse order.

Arthur Shi

Üyelik tarihi: 03-01-2018

173.054 İtibar

428 adet Kılavuz yazıldı

Takım

iFixit iFixit üyesi

Community

138 Üyeler

16.984 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 72