Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

  1. Remove back cover.
    • Remove back cover.

  2. Remove battery. If you have SIM card and SD card in, remove them by the way.
    • Remove battery. If you have SIM card and SD card in, remove them by the way.

  3. Open this cover and release the home button flex connector. Open this cover and release the home button flex connector.
    • Open this cover and release the home button flex connector.

  4. Heat the screen, cut the sticker under it and release the screen connector. Please be careful with the screen flex when sliding to cut the sticker. Heat the screen, cut the sticker under it and release the screen connector. Please be careful with the screen flex when sliding to cut the sticker. Heat the screen, cut the sticker under it and release the screen connector. Please be careful with the screen flex when sliding to cut the sticker.
    • Heat the screen, cut the sticker under it and release the screen connector. Please be careful with the screen flex when sliding to cut the sticker.

  5. Remove the LCD screen from rear case. Remove the LCD screen from rear case.
    • Remove the LCD screen from rear case.

  6. Remove all the screws. Remove all the screws.
    • Remove all the screws.

  7. Get loosen the touch keys from adhesive, and then push the mid-plate out from the middle housing. Get loosen the touch keys from adhesive, and then push the mid-plate out from the middle housing.
    • Get loosen the touch keys from adhesive, and then push the mid-plate out from the middle housing.

  8. Twist off these two screws and remove the whole motherboard assembly. Twist off these two screws and remove the whole motherboard assembly.
    • Twist off these two screws and remove the whole motherboard assembly.

  9. Release the connector,loose the assembly from adhesive and remove it finally. Release the connector,loose the assembly from adhesive and remove it finally. Release the connector,loose the assembly from adhesive and remove it finally.
    • Release the connector,loose the assembly from adhesive and remove it finally.

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Sophia

Üyelik tarihi: 25-03-2014

43.261 İtibar

62 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 4,885