Fix Your Stuff

Right to Repair

Parts & Tools

Samsung Galaxy S6 Edge Motherboard Removal

Yazan: Sam Goldheart (ve 3 başka katılımcı)
  • Yorumlar: 2
  • Favoriler: 0

Zorluk

Orta

Adımlar

7

Gerekli Süre

Bir süre öner??

Bölümler

1

İşaretler

1

Prerequisite Only

Salt Önkoşul

Bu kılavuzun yalnızca diğer kılavuzlar için bir önkoşul kılavuzu olduğunu lütfen dikkate alın.

Giriş

prereq only

  1. Using the flat end of the spudger, disconnect the battery ribbon cable from the motherboard. Using the flat end of the spudger, disconnect the battery ribbon cable from the motherboard.

    • Using the flat end of the spudger, disconnect the battery ribbon cable from the motherboard.

    Düzenle

  2. Disconnect the home button ribbon cable from the motherboard. Disconnect the home button ribbon cable from the motherboard.

    • Disconnect the home button ribbon cable from the motherboard.

    Düzenle

  3. Use the pointed end of a spudger to disconnect the two antenna interconnect cables from the motherboard. Use the pointed end of a spudger to disconnect the two antenna interconnect cables from the motherboard. Use the pointed end of a spudger to disconnect the two antenna interconnect cables from the motherboard.

    • Use the pointed end of a spudger to disconnect the two antenna interconnect cables from the motherboard.

    Düzenle

  5. Disconnect the display ribbon cable from the motherboard using the flat end of the spudger. Disconnect the display ribbon cable from the motherboard using the flat end of the spudger.

    • Disconnect the display ribbon cable from the motherboard using the flat end of the spudger.

    Düzenle

  6. Disconnect the earpiece ribbon cable from the motherboard. Disconnect the earpiece ribbon cable from the motherboard.

    • Disconnect the earpiece ribbon cable from the motherboard.

    Düzenle

  7. The motherboard is an ESD sensitive component and should be handled with care. iFixit recommends using a anti-static bracelet whenever handling components of this nature to avoid damage. Grip the motherboard on both edges toward the top of the device.

    • The motherboard is an ESD sensitive component and should be handled with care. iFixit recommends using a anti-static bracelet whenever handling components of this nature to avoid damage.

    • Grip the motherboard on both edges toward the top of the device.

    • Do not lift the motherboard all the way out in this step; the ribbon cable on the underside needs to be disconnected first.

    • Lift the motherboard up and away from the display, taking care not to put too much stress on the daughterboard ribbon cable.

    Düzenle

  8. Disconnect the daughterboard ribbon cable from the underside of the motherboard. Disconnect the daughterboard ribbon cable from the underside of the motherboard.

    • Disconnect the daughterboard ribbon cable from the underside of the motherboard.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Sam Goldheart

Üyelik tarihi: 18-10-2012

393.715 İtibar

545 adet Kılavuz yazıldı

Rozetler: 48

+45 tane daha rozet

Takım

iFixit iFixit üyesi

Community

108 Üyeler

9.884 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 148