Bu sürüm, hatalı düzenlemeler içerebilir. En son doğrulanmış bellek kopyası dönün.
Neye ihtiyacın var
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Melt the adhesive on the screen by applying a blow dryer directly on the screen.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Wedge the metal spudger in between the screen and the frame to begin separating them.
-
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Slide the metal spudger around the phone at least once.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Use the tweezers to disconnect the screen from the phone by detaching the connection.
-
-
Bu adım çevrilmemiş. Çevrilmesine yardım edin
-
Clean the rest of the adhesive left on the phone by scraping it off with a metal tool.
-
Apply rubbing alcohol on the adhesive to make sure phone is free of any adhesive. Do this by applying some rubbing alcohol onto a napkin.
-
Lightly proceed to clean the phone with that napkin.
-
İptal et: Bu kılavuzu tamamlamadım.
3 farklı kişi bu kılavuzu tamamladı.
3 Yorum
I bought a digitizer with fog and polarizer and a new front glass, it came with the loca. What else do I need to make the complete LCD screen assembly?