Ana içeriğe geç

Giriş

To replace other parts inside your Samsung Galaxy Tab A 10.1, you must first open up the device through the back. This guide will show you how to remove the back panel of the device.

  1. Have the front of the device facing you. Begin near one of the curved edges of the device (see photo two for visual example)
    • Have the front of the device facing you.

    • Begin near one of the curved edges of the device (see photo two for visual example)

    • Place plastic opening tool between the front and back panels.

    • If a plastic opening tool doesn’t work, using a metal spudger may work, but it may damage the plastic on the device.

    • Remember to remove the micro SD card (if present) before you begin.

  2. Once the plastic opening tool is fully inserted, wedge it around device’s edges to separate the panels. Lift the back panel off of the device.
    • Once the plastic opening tool is fully inserted, wedge it around device’s edges to separate the panels.

    • Lift the back panel off of the device.

    • The back panel will make a clicking noise while being lifted off of the device.

Sonuç

To reassemble your device, follow these instructions in reverse order.

6 farklı kişi bu kılavuzu tamamladı.

Isabella Li

Üyelik tarihi: 02-10-2017

1.601 İtibar

7 adet Kılavuz yazıldı

Takım

Cal Poly, Team S15-G6, Livingston Fall 2017 Cal Poly, Team S15-G6, Livingston Fall 2017 üyesi

CPSU-LIVINGSTON-F17S15G6

4 Üyeler

21 adet Kılavuz yazıldı

Bir Yorum

Why need to remove cables when only the back has to be replaced ?

nabe_03 - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 8

Son 7 Gün: 36

Son 30 Gün: 192

Her zaman: 4,251