Ana içeriğe geç

Samsung Galaxy Tab E 9.6 Wi-Fi Digitizer (Screen Replacement) Replacement

Neye ihtiyacın var

Videoya Genel Bakış

  1. Samsung Galaxy Tab E 9.6 Wi-Fi Digitizer (Screen Replacement) Replacement, Digitizer (Screen Replacement): adım 1, 2 resimden 1. Samsung Galaxy Tab E 9.6 Wi-Fi Digitizer (Screen Replacement) Replacement, Digitizer (Screen Replacement): adım 1, 2 resimden 2.
    • Place the Tablet on a flat surface.

    • Gather the required tools : iFixit opening tool, iFixit opening picks, precision tweezers, suction handle, and spudger.

  2. Samsung Galaxy Tab E 9.6 Wi-Fi Digitizer (Screen Replacement) Replacement: adım 2, 1 resimden 1.
    • Place suction handle in the center of the screen. Firmly press it downwards .

    • This is done to help assist lifting the screen once the edges are loose.

  3. Samsung Galaxy Tab E 9.6 Wi-Fi Digitizer (Screen Replacement) Replacement: adım 3, 1 resimden 1.
    • Grab the iFixit pening tool and wedge the sharp end into the corner of the screen. Pry it upwards, lifting up the corner of the screen.

  4. Samsung Galaxy Tab E 9.6 Wi-Fi Digitizer (Screen Replacement) Replacement: adım 4, 1 resimden 1.
    • Place the iFixit opening pick between the lifted corner and the housing to prevent the screen from falling back into the housing.

  5. Samsung Galaxy Tab E 9.6 Wi-Fi Digitizer (Screen Replacement) Replacement: adım 5, 1 resimden 1.
    • Continue around the perimeter of the screen until you have placed the picks in each remaining corner.

    • Be careful removing the double-sided tape while lifting the screen so that the screen does not break.

  6. Samsung Galaxy Tab E 9.6 Wi-Fi Digitizer (Screen Replacement) Replacement: adım 6, 1 resimden 1.
    • Grab the suction handle and gently lift the screen towards the top of the tablet.

    • Take care while lifting the screen to avoid damaging the ribbon cable at the top of the tablet.

  7. Samsung Galaxy Tab E 9.6 Wi-Fi Digitizer (Screen Replacement) Replacement: adım 7, 1 resimden 1.
    • Place the removed screen that is still attached to the ribbon cable flat on the table.

  8. Samsung Galaxy Tab E 9.6 Wi-Fi Digitizer (Screen Replacement) Replacement: adım 8, 1 resimden 1.
    • Grab the iFixit opening tool and wedge the sharp end into the corner of the housing and pry upwards.

    • Place an iFixit opening pick between the housing and the LCD assembly.

  9. Samsung Galaxy Tab E 9.6 Wi-Fi Digitizer (Screen Replacement) Replacement: adım 9, 1 resimden 1.
    • Continue along the outer edge of the housing until you have placed an iFixit opening pick in each corner.

  10. Samsung Galaxy Tab E 9.6 Wi-Fi Digitizer (Screen Replacement) Replacement: adım 10, 1 resimden 1.
    • Remove the LCD assembly from the housing and place it face down on the table.

  11. Samsung Galaxy Tab E 9.6 Wi-Fi Digitizer (Screen Replacement) Replacement: adım 11, 1 resimden 1.
    • Locate the ribbon cable connector on the back of the LCD assembly.

    • Use the spudger to pry the connector tab upwards.

    • Pull the the ribbon cable to remove it from the connector

  12. Samsung Galaxy Tab E 9.6 Wi-Fi Digitizer (Screen Replacement) Replacement: adım 12, 1 resimden 1.
    • Once the ribbon cable is removed, pull the screen off of the motherboard and place it to the side.

Sonuç

To reassemble your device, follow these instructions in reverse order.

6 farklı kişi bu kılavuzu tamamladı.

Juelma

Üyelik tarihi: 05/22/19

253 İtibar

1 Kılavuz yazıldı

Ekip

IUPUI, Team S4-G4, Wilson Summer 2019 IUPUI, Team S4-G4, Wilson Summer 2019 üyesi

IUPUI-WILSON-SU19S4G4

4 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 6

Son 30 gün: 33

Her zaman: 5,199