Eşyalarını Tamir Et Topluluk Mağaza

Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement

Giriş

A broken camera can cause poor photo quality or may not be able to take any photos at all.

Neye ihtiyacın var

  1. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement, Screen: adım 1, 2 resimden 1. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement, Screen: adım 1, 2 resimden 2.

    • Apply the heat gun around the edges of the tablet to melt the adhesive glue.

    • Do not allow the gun to remain still for more than two seconds, so that you do not melt the plastic around the screen.

    • If you do not have access to a heat gun, you may also use an iOpener or a hair dryer. Refer to the iOpener guide for extra help.

    Düzenle

  2. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement: adım 2, 2 resimden 1. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement: adım 2, 2 resimden 2.

    • Apply the suction to the bottom or top right corner.

    • Use the plastic opening tool at several points around the screen while the suction is being applied to pop the screen out.

    Düzenle

  3. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement: adım 3, 1 resimden 1.

    • Once the screen is detached, open the tablet like a book.

    • Gently open the tablet, and do not pull the pieces apart since you can risk damaging the orange ribbon cable.

    Düzenle

  5. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement: adım 4, 1 resimden 1.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Using the precision tweezers, remove the silver tape that is holding the orange ribbon cable connecting the two pieces.

    Düzenle

  6. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement: adım 5, 1 resimden 1.

    • Using the precision tweezers, remove the small press-fit connector from the body of the tablet.

    Düzenle

  7. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement, Screws: adım 6, 2 resimden 1. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement, Screws: adım 6, 2 resimden 2.

    • Using the Philips #000 screwdriver, remove the seventeen 2.74 mm screws around the edges.

    • Remove the two 2.74 mm black screws in the middle of the tablet with the Philips #000 screwdriver.

    • Put the screws on a magnetic project mat or in a container so that you do not lose them.

    Düzenle

  8. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement: adım 7, 3 resimden 1. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement: adım 7, 3 resimden 2. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement: adım 7, 3 resimden 3.

    • Take the plastic opening tool around the tablet to remove the motherboard from the device.

    Düzenle

  9. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement, Camera: adım 8, 3 resimden 1. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement, Camera: adım 8, 3 resimden 2. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement, Camera: adım 8, 3 resimden 3.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Locate the two cameras at the top of the motherboard.

    • To remove the bigger, back-facing camera, use the precision tweezers to slide the silver ribbon cable out of the ZIF connector.

    Düzenle

  10. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement: adım 9, 2 resimden 1. Samsung Galaxy Tab S2 9.7 AT&T Camera Replacement: adım 9, 2 resimden 2.

    • To remove the smaller, front-facing camera, use the precision tweezers to disconnect the press-fit connector.

    • Carefully detach the camera using the precision tweezers.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

5 tane daha katılımcı ile

Joy Harris

Üyelik tarihi: 02/15/17

826 İtibar

7 adet Kılavuz yazıldı

Rozetler: 15

+12 tane daha rozet

Ekip

USF Tampa, Team S3-G4, Sullivan Spring 2017 USF Tampa, Team S3-G4, Sullivan Spring 2017 üyesi

USFT-SULLIVAN-S17S3G4

3 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 18

Her zaman: 366