Giriş

Replace the LCD in your Galaxy Xcover.

Here is the Samsung Galaxy Xcover, with the LCD broken, that will be replaced.
  • Here is the Samsung Galaxy Xcover, with the LCD broken, that will be replaced.

Yorum Ekle

The first step, is remove the battery door. It comes with a security lock, that has to be on open position. Start opening from bottom, and releasing from the side edges.
  • The first step, is remove the battery door. It comes with a security lock, that has to be on open position. Start opening from bottom, and releasing from the side edges.

Yorum Ekle

Remove with a flat screwdriver, the volume button and the power button Now, with a Phillpis Screwdriver, remove all the screws from the backcover.
  • Remove with a flat screwdriver, the volume button and the power button

  • Now, with a Phillpis Screwdriver, remove all the screws from the backcover.

Yorum Ekle

With a flat screwdriver or plastic opener,  separate the front case from the rear case. It will be easy! With a flat screwdriver or plastic opener,  separate the front case from the rear case. It will be easy!
  • With a flat screwdriver or plastic opener, separate the front case from the rear case. It will be easy!

Yorum Ekle

Remove the screw on the lower zone of the main board. The screw is the same of the case, so dont worry if you mix them. Now, with a pliers, unplug the camera and the front speaker. Now, we are going to lift the main board, but ... be careful, below is the LCD flex cable!
  • Remove the screw on the lower zone of the main board. The screw is the same of the case, so dont worry if you mix them.

  • Now, with a pliers, unplug the camera and the front speaker. Now, we are going to lift the main board, but ...

  • be careful, below is the LCD flex cable!

Yorum Ekle

Remove the LCD flat cable, and then, remove the 2 screws on the sides of the front cover. They are the same as the others screws... Now, you can take apart the chassis from the front cover, leaving only the display and the touch.
  • Remove the LCD flat cable, and then, remove the 2 screws on the sides of the front cover. They are the same as the others screws...

  • Now, you can take apart the chassis from the front cover, leaving only the display and the touch.

Yorum Ekle

Lift up the black retainer, and take off the touch flex cable. Be careful, the flex has double side tape below the IC.
  • Lift up the black retainer, and take off the touch flex cable.

  • Be careful, the flex has double side tape below the IC.

  • Now, with a knife or cutter, lift carefully the LCD unit. Place the new LCD, and reassembly the phone.

  • In the near future, I´ll post how to replace the touch screen!

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Jaime

Üyelik tarihi: 05-11-2013

3.106 İtibar

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 5

Son 30 Gün: 38

Tüm Zamanlar: 4,746