1. Place your thumbs on the ends of the screen. Push the watch outward while pulling the band away from the watch.
    • Place your thumbs on the ends of the screen.

    • Push the watch outward while pulling the band away from the watch.

  2. Heating the device with a hair dryer may warp the screen or damage the device.  It it preferable to use an iOpener for this step.
    • Heating the device with a hair dryer may warp the screen or damage the device. It it preferable to use an iOpener for this step.

    • For step-by-step instructions on using an iOpener, see the iOpener Instructions.

    • Use a hair dryer, heat gun, or an iOpener to heat the Gear Fit for 1-2 minutes until it is hot to the touch.

  3. Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. The screen is connected to the device by a ribbon cable on the left side with the power button facing you. Do not try to completely separate the screen from the device yet, and be careful. Gently pry the screen loose using a plastic opening tool. If the screen doesn't easily come loose, more heating may be required
    • The screen is connected to the device by a ribbon cable on the left side with the power button facing you. Do not try to completely separate the screen from the device yet, and be careful.

    • Gently pry the screen loose using a plastic opening tool.

    • If the screen doesn't easily come loose, more heating may be required

  5. Using tweezers as a lever, pry the inner assembly out of the external casing. This will be harder than removing the screen.  Moderate force may be required. This will be harder than removing the screen.  Moderate force may be required.
    • Using tweezers as a lever, pry the inner assembly out of the external casing.

    • This will be harder than removing the screen. Moderate force may be required.

  6. Disconnect the ribbon cables connecting the screen to the motherboard by lifting their metal connectors up off of the board with tweezers. Disconnect the ribbon cables connecting the screen to the motherboard by lifting their metal connectors up off of the board with tweezers. Disconnect the ribbon cables connecting the screen to the motherboard by lifting their metal connectors up off of the board with tweezers.
    • Disconnect the ribbon cables connecting the screen to the motherboard by lifting their metal connectors up off of the board with tweezers.

  7. Gently peel the screen assembly up and away from the device using tweezers. Gently peel the screen assembly up and away from the device using tweezers.
    • Gently peel the screen assembly up and away from the device using tweezers.

Sonuç

To reassemble your device, follow these instructions in reverse order.

14 farklı kişi bu kılavuzu tamamladı.

Nathan Powell

Üyelik tarihi: 24-04-2014

1.278 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 11-49, Amido Spring 2014 Cal Poly, Team 11-49, Amido Spring 2014 üyesi

CPSU-AMIDO-S14S11G49

4 Üyeler

4 adet Kılavuz yazıldı

26 Yorum

Hi!

Thank you very much for this tuto. But wher can we acquire the screen ???

Thanks a lot.

AB

aaa - Yanıt

Where can you buy replacement screen?

Yele Olaniyi - Yanıt

I'm also finding it difficult to buy a replacement screen too. Has anyone discovered some. I thought this website was selling some not too long ago. Any more coming in?

Rochelle - Yanıt

Hi guys,

is it possible to detach the display unit from the protective plastic cover (I think it's not glass) ?

alexxtodorov - Yanıt

Does anyone know where to get the replacement screen?

MrGratts - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 12

Son 7 Gün: 110

Son 30 Gün: 476

Her zaman: 43,517