Eşyalarını Tamir Et Topluluk Mağaza

Samsung Gear VR with Controller Motherboard Replacement

Giriş

If the buttons on your controller are not responding, use this guide to replace the motherboard in your controller. This replacement requires a metal spudger, iFixit opening tool, and Phillips #000 screwdriver.

Neye ihtiyacın var

  1. Samsung Gear VR with Controller Motherboard Replacement, Controller Batteries: adım 1, 3 resimden 1. Samsung Gear VR with Controller Motherboard Replacement, Controller Batteries: adım 1, 3 resimden 2. Samsung Gear VR with Controller Motherboard Replacement, Controller Batteries: adım 1, 3 resimden 3.

    • Turn the controller upside down to access the battery compartment.

    • The battery compartment is located on the opposite side of the buttons.

    • Press on the top of the battery plate and slide down to remove the cover.

    Düzenle

  2. Samsung Gear VR with Controller Motherboard Replacement: adım 2, 3 resimden 1. Samsung Gear VR with Controller Motherboard Replacement: adım 2, 3 resimden 2. Samsung Gear VR with Controller Motherboard Replacement: adım 2, 3 resimden 3.

    • Remove the AAA batteries using your fingers.

    Düzenle

  4. Samsung Gear VR with Controller Motherboard Replacement, Controller Motherboard: adım 3, 2 resimden 1. Samsung Gear VR with Controller Motherboard Replacement, Controller Motherboard: adım 3, 2 resimden 2.

    • Remove the four 5mm Phillips #000 screws.

    Düzenle

  5. Samsung Gear VR with Controller Motherboard Replacement: adım 4, 1 resimden 1.

    • Use the metal spudger to pry the back side of the controller apart from the front.

    • You will have to use the spudger in many different spots along the divide before trying to separate the pieces.

    Düzenle

  6. Samsung Gear VR with Controller Motherboard Replacement: adım 5, 2 resimden 1. Samsung Gear VR with Controller Motherboard Replacement: adım 5, 2 resimden 2.

    • Pull apart the two halves of the controller to access the motherboard.

    Düzenle

  7. Samsung Gear VR with Controller Motherboard Replacement: adım 6, 3 resimden 1. Samsung Gear VR with Controller Motherboard Replacement: adım 6, 3 resimden 2. Samsung Gear VR with Controller Motherboard Replacement: adım 6, 3 resimden 3.

    • Pry on the two pop connectors with the plastic opening tool to detach the motherboard.

    • Separate the motherboard and trackpad from the rear part of the controller.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

1 tane daha katılımcı ile

Jake Criscione

Üyelik tarihi: 01/24/19

587 İtibar

3 adet Kılavuz yazıldı

Rozetler: 11

+8 tane daha rozet

Ekip

Cal Poly, Team S18-G3, White Winter 2019 Cal Poly, Team S18-G3, White Winter 2019 üyesi

CPSU-WHITE-W19S18G3

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 8

Her zaman: 948