Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

Before replacing the lens, make sure to open the lens cover (use the switch on the side of the lens) for a better look at the scratched or dirty lens. If you suspect the lens is just dusty and in need of cleaning, replacing the lens is not necessary.

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the 4 mm screw on the underside of the camcorder near the tripod mount.
    • Remove the 4 mm screw on the underside of the camcorder near the tripod mount.

  2. Remove the 4 mm screw next to the buckle of the hand strap closest to the lens.
    • Remove the 4 mm screw next to the buckle of the hand strap closest to the lens.

  3. Open the LCD screen. Remove the 4 mm screw on the inside panel, located at top left corner.
    • Open the LCD screen. Remove the 4 mm screw on the inside panel, located at top left corner.

  4. Firmly grip and pull the front casing on the lens to remove it.
    • Firmly grip and pull the front casing on the lens to remove it.

    • Be sure to remove the front casing at gently as possible to prevent damaging the attached ribbon cable. If not careful, the ribbon cables could be torn.

  5. Remove the three 5 mm screws surrounding the lens.
    • Remove the three 5 mm screws surrounding the lens.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Renee

Üyelik tarihi: 11-03-2015

219 İtibar

2 adet Kılavuz yazıldı

Takım

Marist, Team 1-5, Laflen Spring 2015 Marist, Team 1-5, Laflen Spring 2015 üyesi

MARS-LAFLEN-S15S1G5

3 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 8

Her zaman: 390