Ana içeriğe geç
  1. Apply pressure to the back cover and slide it forward towards the camera.
    • Apply pressure to the back cover and slide it forward towards the camera.

    • Lift the back cover off the phone.

  2. Holding the phone firmly, use the notches to grip and lift up the battery.
    • Holding the phone firmly, use the notches to grip and lift up the battery.

  3. Remove the four 4.45mm screws at the corners of the phone.
    • Remove the four 4.45mm screws at the corners of the phone.

  4. Use the plastic opening tool to unhinge the locks around the edges of the phone. Do not worry about the inner components of the phone; they are not connected to this case.
    • Use the plastic opening tool to unhinge the locks around the edges of the phone.

    • Do not worry about the inner components of the phone; they are not connected to this case.

  5. Lift the casing off of the phone.
    • Lift the casing off of the phone.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Jacob Michener

Üyelik tarihi: 10-10-2011

31 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 3-13, Regan Fall 2011 Cal Poly, Team 3-13, Regan Fall 2011 üyesi

CPSU-REGAN-F11S3G13

4 Üyeler

16 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 787