Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

This guide will require the user to disassemble the rear and top panel to access the button.

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the top hinged panel by taking out the pins at the bottom of this panel. Remove the top hinged panel by taking out the pins at the bottom of this panel. Remove the top hinged panel by taking out the pins at the bottom of this panel.
    • Remove the top hinged panel by taking out the pins at the bottom of this panel.

  2. Using a Phillips #2 screwdriver, remove the four screws on the back of the printer.
    • Using a Phillips #2 screwdriver, remove the four screws on the back of the printer.

  3. Gently lift the top panel while simultaneously pulling off the back panel. Before pulling out the back panel entirely, make sure to remove the rear cooling fan from its slot. Before pulling out the back panel entirely, make sure to remove the rear cooling fan from its slot.
    • Gently lift the top panel while simultaneously pulling off the back panel.

    • Before pulling out the back panel entirely, make sure to remove the rear cooling fan from its slot.

  4. Remove the front panel by gently separating the holes on the panel from the pegs attached to the main printer body. Remove the front panel by gently separating the holes on the panel from the pegs attached to the main printer body. Remove the front panel by gently separating the holes on the panel from the pegs attached to the main printer body.
    • Remove the front panel by gently separating the holes on the panel from the pegs attached to the main printer body.

  5. Using a Phillips #2 screwdriver, remove both 1" screws on the front face of the printer.
    • Using a Phillips #2 screwdriver, remove both 1" screws on the front face of the printer.

  6. Using a plastic opening tool, gently lift one side of the top panel from its peg. Repeat the last step to free the opposite side of the top panel. Lift the top panel from the front to remove it entirely.
    • Using a plastic opening tool, gently lift one side of the top panel from its peg.

    • Repeat the last step to free the opposite side of the top panel.

    • Lift the top panel from the front to remove it entirely.

    • Turn over the top panel to reveal the button on the underside of the panel.

  7. Using a Phillips #2 screwdriver, remove both 1" screws that secure the button to the underside of the top panel.
    • Using a Phillips #2 screwdriver, remove both 1" screws that secure the button to the underside of the top panel.

  8. Remove the clear plastic piece and the orange button from the panel. Remove the orange button and the spring from the clear plastic holder.
    • Remove the clear plastic piece and the orange button from the panel.

    • Remove the orange button and the spring from the clear plastic holder.

    • Replace the button and reassemble the printer following the directions in reverse order.

Bitiş Çizgisi

2 farklı kişi bu kılavuzu tamamladı.

bbaustin

Üyelik tarihi: 12-10-2011

247 İtibar

6 adet Kılavuz yazıldı

Takım

Cal Poly, Team 17-18, Regan Fall 2011 Cal Poly, Team 17-18, Regan Fall 2011 üyesi

CPSU-REGAN-F11S17G18

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 6

Son 30 gün: 17

Her zaman: 2,715