Giriş

Use this guide to remove and replace a dysfunctional lens on the Samsung PL20 digital camera.

Remove the battery and the memory card from the device.
  • Remove the battery and the memory card from the device.

  • Remove the two screws on the side of the device, to the left of the camera lens.

Yorum Ekle

Remove the single screw from the bottom of the device.
  • Remove the single screw from the bottom of the device.

  • Remove the two screws on the side of the the device, to the right of the camera lens.

  • Using a plastic opening tool, pry the outside casing apart. Start from the battery compartment and work around the seem of the casing.

Yorum Ekle

  • Remove the back panel, revealing the LCD screen.

  • Pull the LCD screen out of its holder. Once you have access to the connecting strip, flip the clip upwards releasing the screen completely and remove.

Yorum Ekle

  • Gently pull the front panel from the device.

  • Remove the two screws attaching the LCD screen holder to the device.

  • Remove the screen holder from the rest of the device.

Yorum Ekle

  • Flip the grey clip upwards, releasing the connector from the device.

  • Disconnect the ribbon cable extending from the left side.

  • Disconnect the ribbon cable extending from the button bar.

    • Remove the 2 screws.

Yorum Ekle

  • Remove these 3 screws. releasing the lens from the logic board.

  • Remove the lens from the logic board.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

oldturkey03

Üyelik tarihi: 29-09-2010

536.167 İtibar

101 adet Kılavuz yazıldı

Takım

OTS OTS üyesi

Business

1 Üye

121 adet Kılavuz yazıldı

Bir Yorum

Beware there is a capacitor that stores a charge even when the battery is removed. On my camera i touched it, it created a short circuit, i got a shock, and it killed my camera.

morrisettema - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 4

Her zaman: 2,458