Eşyalarını Tamir Et Topluluk Mağaza

Samsung SC MX-20 Hand Strap Replacement

Giriş

When you use your camcorder to record video, you’ll find that the hand strap is one of the most useful components to stabilize your image/video. The hand strap in your device is likely to wear out and become unusable. If you’re looking to replace a worn out or damaged hand strap, follow the steps in this guide.

Neye ihtiyacın var

  1. Samsung SC MX-20 Hand Strap Replacement, Hand Strap: adım 1, 3 resimden 1. Samsung SC MX-20 Hand Strap Replacement, Hand Strap: adım 1, 3 resimden 2. Samsung SC MX-20 Hand Strap Replacement, Hand Strap: adım 1, 3 resimden 3.

    • Remove all eight screws using the Phillips #000 screwdriver.

    Düzenle

  2. Samsung SC MX-20 Hand Strap Replacement: adım 2, 1 resimden 1.

    • Pull apart the sides of the camera once the screws are removed.

    Düzenle

  4. Samsung SC MX-20 Hand Strap Replacement: adım 3, 1 resimden 1.

    • Remove the three screws using the Phillips #000 screwdriver.

    Düzenle

  5. Samsung SC MX-20 Hand Strap Replacement: adım 4, 1 resimden 1.

    • Remove the three screws using the Phillips #000 screwdriver.

    Düzenle

  6. Samsung SC MX-20 Hand Strap Replacement: adım 5, 1 resimden 1.

    • Remove the four screws using a Phillips #000 screwdriver.

    Düzenle

  7. Samsung SC MX-20 Hand Strap Replacement: adım 6, 2 resimden 1. Samsung SC MX-20 Hand Strap Replacement: adım 6, 2 resimden 2.

    • Remove the hand strap from the device.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 11

Her zaman: 180