Giriş

This guide will teach you how to get to and install the back case of the phone.

Parçalar

Hiçbir parçaya gerek yok.

  1. To separate the battery from the phone, use your thumb to push in the button as shown.
    • To separate the battery from the phone, use your thumb to push in the button as shown.

    • Keep the unlock button pressed as you slide the battery away from the button.

    • Pull the battery away from the phone.

    Yorum Ekle

  2. Use a T6 Torx screwdriver to remove the highlighted screws.
    • Use a T6 Torx screwdriver to remove the highlighted screws.

    • These are the four screws, about 10 mm long, that need to be removed. Be careful with the screws as they are small and easy to misplace.

    • Carefully pry apart the two pieces, laying the back case to the side.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Will Gunter

Üyelik tarihi: 23-10-2012

1 İtibar

4 adet Kılavuz yazıldı

Takım

Clemson, Team 14-6, Benson Fall 2012 Clemson, Team 14-6, Benson Fall 2012 üyesi

CLEM-BENSON-F12S14G6

3 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 198