Giriş

The screen may become broken over time. This guide will assist in the replacement of the screen.

Parçalar

Hiçbir parçaya gerek yok.

Slide the latch on the back of the phone up.
  • Slide the latch on the back of the phone up.

Yorum Ekle

Remove the battery.
  • Remove the battery.

Yorum Ekle

After removing the battery, remove the four small Phillips-head screws with a #0 Phillips screwdriver.
  • After removing the battery, remove the four small Phillips-head screws with a #0 Phillips screwdriver.

Yorum Ekle

Using a thumbtack, pry the small plastic cover from the case near the base of the antenna.
  • Using a thumbtack, pry the small plastic cover from the case near the base of the antenna.

Yorum Ekle

With a #0 Phillips screwdriver remove the screw which you just uncovered.
  • With a #0 Phillips screwdriver remove the screw which you just uncovered.

Yorum Ekle

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Using the spudger, carefully pry the case apart starting near the charging port. Ease the case open. Then disconnect the small power connector near the top of the phone.
  • Using the spudger, carefully pry the case apart starting near the charging port. Ease the case open.

  • Then disconnect the small power connector near the top of the phone.

Yorum Ekle

Gently pry up the ribbon-type connector with the spudger.
  • Gently pry up the ribbon-type connector with the spudger.

Yorum Ekle

Carefully pry the logic board from the case with the spudger.
  • Carefully pry the logic board from the case with the spudger.

Yorum Ekle

Once the logic board has been removed, peel the keypad up.
  • Once the logic board has been removed, peel the keypad up.

Yorum Ekle

When using a spudger the keypad housing comes off quite easily, although it may be necessary to guide the ribbon cable through the slot in the housing. When using a spudger the keypad housing comes off quite easily, although it may be necessary to guide the ribbon cable through the slot in the housing.
  • When using a spudger the keypad housing comes off quite easily, although it may be necessary to guide the ribbon cable through the slot in the housing.

Yorum Ekle

Remove screws with #0 Phillips screwdriver.
  • Remove screws with #0 Phillips screwdriver.

Yorum Ekle

Carefully pry apart the casing with the spudger tool.
  • Carefully pry apart the casing with the spudger tool.

Yorum Ekle

Use the spudger to carefully pry off the speaker.
  • Use the spudger to carefully pry off the speaker.

Yorum Ekle

Carefully pry off the ringer with the spudger.
  • Carefully pry off the ringer with the spudger.

Yorum Ekle

Carefully pry off the screen with the spudger.
  • Carefully pry off the screen with the spudger.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Nathan Brink

Üyelik tarihi: 11-04-2010

1 İtibar

14 adet Kılavuz yazıldı

Takım

Cal Poly, Team 34-59, Forte Spring 2010 Cal Poly, Team 34-59, Forte Spring 2010 üyesi

CPSU-FORTE-S10S34G59

4 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 5

Her zaman: 3,220