Ana içeriğe geç
Samsung SCV-VLUUST50 Flash Bulb Replacement

Samsung SCV-VLUUST50 Flash Bulb Replacement

Jade Withrow

Jade Withrow ve 3 diğer katkıda bulunanlar

En son November 17, 2020 tarihinde güncellendi

20 dakika
Orta

The replacement of this flash light bulb will be needed when flash mode isn't working.

Neye ihtiyacın var

Aletler

Daha fazlasını göster…

  1. Samsung SCV-VLUUST50 Flash Bulb Replacement, Cover: adım 1, 3 resimden 1. Samsung SCV-VLUUST50 Flash Bulb Replacement, Cover: adım 1, 3 resimden 2. Samsung SCV-VLUUST50 Flash Bulb Replacement, Cover: adım 1, 3 resimden 3.
    • Unscrew all visible screws indicated by red circles with a #00 Phillips driver.

    • Slide memory card cover and unscrew hidden screw underneath with a #00 Phillips driver.

  2. Samsung SCV-VLUUST50 Flash Bulb Replacement: adım 2, 3 resimden 1. Samsung SCV-VLUUST50 Flash Bulb Replacement: adım 2, 3 resimden 2. Samsung SCV-VLUUST50 Flash Bulb Replacement: adım 2, 3 resimden 3.
    • Remove the flat side panel by applying gentle pressure toward the bottom of the camera.

    • Remove the corner panel by applying pressure away from the shutter button.

    • The memory card cover will come off with the corner panel.

    • Remove the top panel by applying gentle pressure away from the shutter button.

  3. Samsung SCV-VLUUST50 Flash Bulb Replacement: adım 3, 1 resimden 1.
    • Remove screws beneath the top panel indicated by red circles with a #00 Phillips driver.

  4. Samsung SCV-VLUUST50 Flash Bulb Replacement: adım 4, 2 resimden 1. Samsung SCV-VLUUST50 Flash Bulb Replacement: adım 4, 2 resimden 2.
    • Remove the front and back covers by pulling them straight apart.

  5. Samsung SCV-VLUUST50 Flash Bulb Replacement, Flash Bulb: adım 5, 2 resimden 1. Samsung SCV-VLUUST50 Flash Bulb Replacement, Flash Bulb: adım 5, 2 resimden 2.
    • Remove the screw securing the shutter button to the camera frame.

    • Lift the shutter button to remove it.

  6. Samsung SCV-VLUUST50 Flash Bulb Replacement: adım 6, 2 resimden 1. Samsung SCV-VLUUST50 Flash Bulb Replacement: adım 6, 2 resimden 2.
    • Remove the screws from the circuitry with a Phillips #000 driver.

    • Remove the screw connecting the flash housing to the camera frame with the same driver.

  7. Samsung SCV-VLUUST50 Flash Bulb Replacement: adım 7, 2 resimden 1. Samsung SCV-VLUUST50 Flash Bulb Replacement: adım 7, 2 resimden 2.
    • Pull the flash housing away from the camera frame.

    • Cut the wires connecting the flash module to the circuitry.

    • Connect the new flash module to the circuitry with a soldering iron and electrical solder.

Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 176