Eşyalarını Tamir Et Topluluk Mağaza

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Samsung SCV-VLUUST50 Flash Bulb Replacement

Giriş

The replacement of this flash light bulb will be needed when flash mode isn't working.

Neye ihtiyacın var

  1. Samsung SCV-VLUUST50 Flash Bulb Replacement, Cover: adım 1, 3 resimden 1. Samsung SCV-VLUUST50 Flash Bulb Replacement, Cover: adım 1, 3 resimden 2. Samsung SCV-VLUUST50 Flash Bulb Replacement, Cover: adım 1, 3 resimden 3.

    • Unscrew all visible screws indicated by red circles with a #00 Phillips driver.

    • Slide memory card cover and unscrew hidden screw underneath with a #00 Phillips driver.

    Düzenle

  2. Samsung SCV-VLUUST50 Flash Bulb Replacement: adım 2, 3 resimden 1. Samsung SCV-VLUUST50 Flash Bulb Replacement: adım 2, 3 resimden 2. Samsung SCV-VLUUST50 Flash Bulb Replacement: adım 2, 3 resimden 3.

    • Remove the flat side panel by applying gentle pressure toward the bottom of the camera.

    • Remove the corner panel by applying pressure away from the shutter button.

    • The memory card cover will come off with the corner panel.

    • Remove the top panel by applying gentle pressure away from the shutter button.

    Düzenle

  3. Samsung SCV-VLUUST50 Flash Bulb Replacement: adım 3, 1 resimden 1.

    • Remove screws beneath the top panel indicated by red circles with a #00 Phillips driver.

    Düzenle

  5. Samsung SCV-VLUUST50 Flash Bulb Replacement: adım 4, 2 resimden 1. Samsung SCV-VLUUST50 Flash Bulb Replacement: adım 4, 2 resimden 2.

    • Remove the front and back covers by pulling them straight apart.

    Düzenle

  6. Samsung SCV-VLUUST50 Flash Bulb Replacement, Flash Bulb: adım 5, 2 resimden 1. Samsung SCV-VLUUST50 Flash Bulb Replacement, Flash Bulb: adım 5, 2 resimden 2.

    • Remove the screw securing the shutter button to the camera frame.

    • Lift the shutter button to remove it.

    Düzenle

  7. Samsung SCV-VLUUST50 Flash Bulb Replacement: adım 6, 2 resimden 1. Samsung SCV-VLUUST50 Flash Bulb Replacement: adım 6, 2 resimden 2.

    • Remove the screws from the circuitry with a Phillips #000 driver.

    • Remove the screw connecting the flash housing to the camera frame with the same driver.

    Düzenle

  8. Samsung SCV-VLUUST50 Flash Bulb Replacement: adım 7, 2 resimden 1. Samsung SCV-VLUUST50 Flash Bulb Replacement: adım 7, 2 resimden 2.

    • Pull the flash housing away from the camera frame.

    • Cut the wires connecting the flash module to the circuitry.

    • Connect the new flash module to the circuitry with a soldering iron and electrical solder.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 135