Giriş

Use this guide to replace your Samsung SGH A707 phone's keypad.

  1. Press on the markings on the cover and pull it down to reveal the battery.
    • Press on the markings on the cover and pull it down to reveal the battery.

    Yorum Ekle

  2. Use your fingers to pull the battery out of its position. You may also flip the phone and the battery will fall out.
    • Use your fingers to pull the battery out of its position. You may also flip the phone and the battery will fall out.

    Yorum Ekle

    • Here is the phone without the battery.

    Yorum Ekle

    • Unscrew the six screws on the back of the phone using the Phillips #0 screw driver.

    Yorum Ekle

    • Use the prying tool the pry off the phone's plastic frame.

    Yorum Ekle

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Use the prying tool to disconnect the rectangular connector.

    Yorum Ekle

    • Use the prying tool to disconnect the small connector.

    Yorum Ekle

    • Gently pull off the circuit board.

    Yorum Ekle

    • Here is the phone without the logic board.

    Yorum Ekle

    • Hold the phone and gently separate the circuit board that holds the dome switches and the front face of the phone, revealing the rubber keyboard.

    Yorum Ekle

    • Here is the phone without the dome switch circuit board.

    Yorum Ekle

    • Here is the phone and the rubber keyboard.

    Yorum Ekle

    • Here is the rubber keyboard and the dome switch circuit board. A quick inspection of these elements can reveal keypad malfunctions. Look for dirt or debris that do not belong there.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

yfm

Üyelik tarihi: 06-11-2012

10 İtibar

7 adet Kılavuz yazıldı

Takım

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 3

Her zaman: 454