Giriş

Use this guide to replace your Samsung SGH A707 phone's logic board.

Press on the markings on the cover and pull it down to reveal the battery.
  • Press on the markings on the cover and pull it down to reveal the battery.

Yorum Ekle

Use your fingers to pull the battery out of its position. You may also flip the phone and the battery will fall out.
  • Use your fingers to pull the battery out of its position. You may also flip the phone and the battery will fall out.

Yorum Ekle

Here is the phone without the battery.
  • Here is the phone without the battery.

Yorum Ekle

Unscrew the six screws on the back of the phone using the Phillips #0 screw driver. Unscrew the six screws on the back of the phone using the Phillips #0 screw driver.
  • Unscrew the six screws on the back of the phone using the Phillips #0 screw driver.

Yorum Ekle

Use the prying tool the pry off the phone's plastic frame.
  • Use the prying tool the pry off the phone's plastic frame.

Yorum Ekle

Use the prying tool to disconnect the rectangular connector. Use the prying tool to disconnect the rectangular connector. Use the prying tool to disconnect the rectangular connector.
  • Use the prying tool to disconnect the rectangular connector.

Yorum Ekle

Use the prying tool to disconnect the small connector.
  • Use the prying tool to disconnect the small connector.

Yorum Ekle

Gently pull off the circuit board.
  • Gently pull off the circuit board.

Yorum Ekle

Here is the phone without the logic board.
  • Here is the phone without the logic board.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

yfm

Üyelik tarihi: 06-11-2012

10 İtibar

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 5

Tüm Zamanlar: 399