Ana içeriğe geç

Samsung SGH-X495 Charger Jack Replacement

Neye ihtiyacın var

  1. Samsung SGH-X495 Charger Jack Replacement, Battery: adım 1, 2 resimden 1. Samsung SGH-X495 Charger Jack Replacement, Battery: adım 1, 2 resimden 2.
    • Use thumb nail to release the white hook; then use fingertip to pry the battery loose starting from the top.

    • Second photo gives a view from the back of the phone and battery.

  2. Samsung SGH-X495 Charger Jack Replacement, Backplate: adım 2, 1 resimden 1.
    • Remove the 4 (4.7mm) philips head screws.

  3. Samsung SGH-X495 Charger Jack Replacement: adım 3, 1 resimden 1.
    • Unplug the rubber charger outlet cover.

  4. Samsung SGH-X495 Charger Jack Replacement: adım 4, 1 resimden 1.
    • Unplug the rubber headset jack cover.

  5. Samsung SGH-X495 Charger Jack Replacement: adım 5, 2 resimden 1. Samsung SGH-X495 Charger Jack Replacement: adım 5, 2 resimden 2.
    • Begin by inserting the pry tool near the charger jack.

    • There are 4 tabs to release.

    • Start at the bottom and slide the tool up, lifting the silver front of the phone away from the white backing.

    • Loosen the 2 side tabs before moving on to the top two.

    • See the second photo to see location of the tabs.

    • Be careful of the ribbon wires shown in second photo.

  6. Samsung SGH-X495 Charger Jack Replacement: adım 6, 2 resimden 1. Samsung SGH-X495 Charger Jack Replacement: adım 6, 2 resimden 2.
    • Once the two side tabs are free; gently pry the white backing down to release the top two tabs.

    • Hold the phone with the left hand as shown

    • Wiggle the white backplate from side to side while pulling down with the right hand.

    • Be careful of the ribbon wires shown in second photo.

  7. Samsung SGH-X495 Charger Jack Replacement, Motherboard: adım 7, 1 resimden 1.
    • Remove the ribbon wires connecting to the screen using the pry tool.

  8. Samsung SGH-X495 Charger Jack Replacement: adım 8, 1 resimden 1.
    • 2 tabs hold the motherboard in place.

    • Release the labeled tabs with the pry tool from the location shown.

  9. Samsung SGH-X495 Charger Jack Replacement: adım 9, 1 resimden 1.
    • Separate the motherboard from the phone.

  10. Samsung SGH-X495 Charger Jack Replacement, Charger Jack: adım 10, 1 resimden 1.
    • Solder connections are accessable to replace the Chargers Jack.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Matthew Hove

Üyelik tarihi: 01/05/11

1.031 İtibar

10 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 3-40, Regan Winter 2011 Cal Poly, Team 3-40, Regan Winter 2011 üyesi

CPSU-REGAN-W11S3G40

4 Üyeler

20 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 1,642