Eşyalarını Tamir Et Topluluk Mağaza

Samsung U28E510 Jog Button Replacement

Giriş

This guide will assist users to replace a damaged or nonoperational jog button.

Neye ihtiyacın var

  1. Samsung U28E510 Jog Button Replacement, Jog Button: adım 1, 3 resimden 1. Samsung U28E510 Jog Button Replacement, Jog Button: adım 1, 3 resimden 2. Samsung U28E510 Jog Button Replacement, Jog Button: adım 1, 3 resimden 3.

    • Start by removing the screen bezel.

    • Use a pair of spudgers to pry between the bezel and the rest of the monitor.

    • Ideally use plastic tools as this step could damage the edges of the screencover.

    • lay monitor on its back and pull off screen cover.

    Düzenle

  3. Samsung U28E510 Jog Button Replacement: adım 2, 2 resimden 1. Samsung U28E510 Jog Button Replacement: adım 2, 2 resimden 2.

    • Flip the monitor over so that it is facedown.

    • remove the single screw in the middle using a #2 Phillips screwdriver.

    • Remove the backing to reveal the Jog Button.

    Düzenle

  4. Samsung U28E510 Jog Button Replacement: adım 3, 1 resimden 1.

    • Disconnect signal cable to power supply board.

    • Remove and replace jog button.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order. Ensure the bezel completely snaps in place all around monitor.

3 farklı kişi bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Jake Ritter

Üyelik tarihi: 01/22/18

106 İtibar

1 Kılavuz yazıldı

Rozetler: 5

+2 tane daha rozet

Ekip

Cal Poly, Team S11-G1, Banghart Winter 2018 Cal Poly, Team S11-G1, Banghart Winter 2018 üyesi

CPSU-BANGHART-W18S11G1

4 Üyeler

6 adet Kılavuz yazıldı

5 Yorum

i have a samsung u28d590d and it works just the same. simple and easy as the guide says.

joshsc2 - Yanıt

Does anyone have the part number or where I can buy the new jog button?

Kyle Gulliford - Yanıt

“bn96-32135b “

Gary Deon -

this is the part number i found BN96-32135B

Gary Deon - Yanıt

the button on my monitor wasn't working anymore - pressing it didn't do anything. So I decided to follow this great guide. When I removed the top of the button and put it on again, I noticed that it worked again. Seems that there had been just to many dust.

Thanx for this guide!

Ralf D. Müller - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 8

Son 7 gün: 16

Son 30 gün: 84

Her zaman: 6,450