Giriş

This guide will give user step by step instructions on how to replace damaged or scratched screen of the camera.

The first thing to do will be unscrew all the screws using Phillips #000 Screwdriver.
  • The first thing to do will be unscrew all the screws using Phillips #000 Screwdriver.

  • Keep all the screws in order. Black screws goes under the bottom of camera, and the silver screws goes on the sides and inside of the camera.

Yorum Ekle

Using the spudger, and plastic opening tool open the casing of camera.
  • Using the spudger, and plastic opening tool open the casing of camera.

Yorum Ekle

  • Once you open the camera case, you will be able to work on any part of the camera.

Yorum Ekle

  • Open all the screws around the screen using Phillips #000 Screwdriver.

Yorum Ekle

  • First disconnect the ribbon by using spudger.

  • Carefully take out the old screen and replace it with a new screen.

  • Be careful when you pull out the screen, because there is a ribbon attached to the panel.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Sarmad Khan

Üyelik tarihi: 09-01-2015

525 İtibar

5 adet Kılavuz yazıldı

Takım

USF Tampa, Team 1-6, Tanski Winter 2015 USF Tampa, Team 1-6, Tanski Winter 2015 üyesi

USFT-TANSKI-W15S1G6

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 8

Her zaman: 494