Giriş

Follow this guide to replace a faulty headphone jack.

Locate and remove the screw on the bottom of the device. The screw is next to the battery compartment lid. Locate and remove the screw on the bottom of the device. The screw is next to the battery compartment lid.
  • Locate and remove the screw on the bottom of the device. The screw is next to the battery compartment lid.

Yorum Ekle

Remove the battery compartment cover. Remove the battery.
  • Remove the battery compartment cover.

  • Remove the battery.

Yorum Ekle

Now gently pry the two halves of the case apart.
  • Now gently pry the two halves of the case apart.

  • There are several interlocking pegs located along the edge of the device's casings.

  • Pry the pegs apart one at a time, while working your way around the case.

  • Be careful when prying apart the pegs they are made of plastic, and you don't want to break them.

Yorum Ekle

  • The two halves of the case won't want to be separated at first. That's because the battery contact springs are in the way.

  • Push the battery contact springs down through their respective holes in the case. Now the case will come away freely.

Yorum Ekle

  • Remove the cover to the battery compartment.

  • Remove the battery. You'll need both cover and battery out of the way for the next step.

Yorum Ekle

The part of the casing that houses the USB jack and headphone jack is the final part which will have to be separated.
  • The part of the casing that houses the USB jack and headphone jack is the final part which will have to be separated.

  • Two clips are the only things holding this portion of the casings together.

  • Once again, gently pry the two outer casings apart by pulling them away from one another.

Yorum Ekle

You now have access to all components found on the inside of the device!
  • You now have access to all components found on the inside of the device!

Yorum Ekle

Locate the headphone jack on the motherboard.
  • Locate the headphone jack on the motherboard.

Yorum Ekle

Use soldering iron to melt the solder connecting the faulty headphone jack to the motherboard. Use soldering iron to melt the solder connecting the faulty headphone jack to the motherboard. Use soldering iron to melt the solder connecting the faulty headphone jack to the motherboard.
  • Use soldering iron to melt the solder connecting the faulty headphone jack to the motherboard.

Yorum Ekle

The solder and soldering iron will be very hot at this time. Do not touch unless wearing protective gloves as you will be burnt.
  • The solder and soldering iron will be very hot at this time. Do not touch unless wearing protective gloves as you will be burnt.

  • Be sure to always elevate the hot end of the soldering iron on a metal stand to prevent incidental burns.

Yorum Ekle

With solder melted simultaneously remove the faulty headphone jack from the motherboard.
  • With solder melted simultaneously remove the faulty headphone jack from the motherboard.

Yorum Ekle

Replace the faulty headphone jack with one which is in working order.
  • Replace the faulty headphone jack with one which is in working order.

Yorum Ekle

With the new headphone jack in place, use the soldering iron and solder to create a stable connection between the motherboard and headphone jack. Be sure to allow the new solder to cool and harden. Be sure to allow the new solder to cool and harden.
  • With the new headphone jack in place, use the soldering iron and solder to create a stable connection between the motherboard and headphone jack.

  • Be sure to allow the new solder to cool and harden.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

James Thorne

Üyelik tarihi: 05-11-2013

625 İtibar

6 adet Kılavuz yazıldı

Takım

UMass Dartmouth, Team 1-8, Shastany Fall 2013 UMass Dartmouth, Team 1-8, Shastany Fall 2013 üyesi

UMASSD-SHASTANY-F13S1G8

3 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 6

Tüm Zamanlar: 711