Giriş

To replace a faulty microphone follow the steps in this guide. This may be your only option if you find yourself unable to make voice recordings anymore with your device.

  1. Remove the battery compartment cover.
    • Remove the battery compartment cover.

    • Remove the battery.

    Yorum Ekle

  2. Locate and remove the screw next to the battery compartment lid.
    • Locate and remove the screw next to the battery compartment lid.

    Yorum Ekle

    • Locate the interlocking pegs along the seam of the device's casings.

    • Gently pry the pegs apart one at a time, working your way around the case.

    • Be careful when prying apart the pegs: they are made of plastic and may break.

    Yorum Ekle

    • The battery contact springs may prevent the case from separating.

    • Push the battery contact springs down through the hole in the case.

    Yorum Ekle

    • The casing protecting the USB and headphone jacks must be removed.

    • Locate and gently pry apart the two interlocking clips holding it in place.

    • The outer casings may now be removed and the MP3 player should separate.

    Yorum Ekle

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • You now have access to all components found on the inside of the device!

    Yorum Ekle

    • Locate microphone on motherboard.

    Yorum Ekle

    • Find where microphone is connected to motherboard via solder.

    Yorum Ekle

    • Use the soldering iron to liquefy the solder connecting the microphone to the motherboard.

    Yorum Ekle

    • The solder and soldering iron will be very hot at this time. Do not touch unless wearing protective gloves as you will be burnt.

    • When not in use, be sure to always elevate the hot end of the soldering iron on a metal stand to prevent incidental burns.

    Yorum Ekle

    • Remove the faulty microphone as you heat and melt the soldering points.

    Yorum Ekle

    • Replace the faulty microphone with a new one in working order.

    Yorum Ekle

    • With the new microphone in place, use the soldering iron and solder to create a stable connection between the motherboard and microphone.

    • Give the new solder time to cool and harden.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

James Thorne

Üyelik tarihi: 05-11-2013

625 İtibar

6 adet Kılavuz yazıldı

Takım

UMass Dartmouth, Team 1-8, Shastany Fall 2013 UMass Dartmouth, Team 1-8, Shastany Fall 2013 üyesi

UMASSD-SHASTANY-F13S1G8

3 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 317