Sansa e250 Screen Replacement

Yazan: Jarrod (ve 6 başka katılımcı)

Yorumlar: 1
Favoriler: 1
Tamamlanma: 1

Zorluk

Orta

Adımlar

Gerekli Süre

15 dakika

Giriş

This guide needs additional details to complete the procedure. The LCD screen is affixed to the motherboard and cannot be replaced without specialized tools.

Aletler

Bu aletleri satın al

Phillips #00 Screwdriver

$6,99

Satın Al
Spudger

$2,99

Satın Al

Parçalar

Hiçbir parçaya gerek yok.

Adım 1 Sansa e250

Use a #0 Phillips head screwdriver to remove the four small black screws from the back of the device.

Use a #0 Phillips head screwdriver to remove the four small black screws from the back of the device.
To ensure you don't lose any tiny parts during the replacement process, place parts on the white magnetic sheet.
Once the screws have been removed, proceed to take off back cover.

Düzenle

Adım 2

Now, proceed to lift the battery out and remove it.

Now, proceed to lift the battery out and remove it.

Düzenle

Adım 3

Use a #0 Phillips screwdriver to remove the four small silver screws from the outside corners of the battery housing.

Düzenle

Adım 4

Now gently pry the front cover off. A Black Spudger can be used to assist in the removal of the cover.

Düzenle

Adım 5

Gently separate the mainboard from the battery housing. This may be difficult around the headphone jack. Use a spudger if necessary.
Pull the motherboard out and down away from the top of the phone.

Düzenle

Adım 6 Screen

Unsnap the screen clips from the motherboard

Düzenle

Adım 7

This is as far as you can go without specialized board rework equipment. Trying to forcibly remove the screen will destroy it, but you can gently move it aside for cleaning or access to other board components.

Düzenle