Giriş

A complete guide to replacing the main board.

Parçalar

Hiçbir parçaya gerek yok.

  1. Place your device upside down and locate the two battery compartments.
    • Place your device upside down and locate the two battery compartments.

  2. Press on the tabs at the bottom of the battery covers then lift up to remove.
    • Press on the tabs at the bottom of the battery covers then lift up to remove.

    • Remove batteries if they are present.

    • Remove the following screws:

      • Seven Phillips scres

      • One 4.5 mm Gamebit screw

    • Use tweezers to take all other screws out.

    • Gently open the case by unfolding it over the top of the Sega Game Gear.

    • Do not pull the back of the case away, as cables are connected between both sides.

    • Carefully unplug the 2 white-tipped connectors on the top cover.

    • Unscrew all the marked screws.

    • Slide the logic board out from under the circular black fastener at the top-left corner of the case.

    • Place the logic board on a flat surface.

Sonuç

To reassemble your device, follow these instructions in reverse order.

6 başka kişi bu kılavuzu tamamladı.

Brandon Page

Üyelik tarihi: 15-04-2010

130 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 28-33, Regan Spring 2010 Cal Poly, Team 28-33, Regan Spring 2010 üyesi

CPSU-REGAN-S10S28G33

5 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 5

Son 7 Gün: 29

Son 30 Gün: 136

Her zaman: 15,404