Eşyalarını Tamir Et Topluluk Mağaza

Sega Game Gear Screen Replacement

Giriş

A guide to installing a replacement screen on a Sega Game Gear.

Neye ihtiyacın var

  1. Sega Game Gear Screen Replacement, Battery: adım 1, 1 resimden 1.

    • Place your device upside down and locate the two battery compartments.

    Düzenle

  2. Sega Game Gear Screen Replacement: adım 2, 1 resimden 1.

    • Press on the tabs at the bottom of the battery covers then lift up to remove.

    • Remove batteries if they are present.

    Düzenle

  3. Sega Game Gear Screen Replacement, Case: adım 3, 1 resimden 1.

    • Remove the following screws:

    • Six Phillips screws

    • One 4.5 mm Gamebit screw

    Düzenle

  4. Sega Game Gear Screen Replacement: adım 4, 1 resimden 1.

    • Use tweezers to take all other screws out.

    Düzenle

  6. Sega Game Gear Screen Replacement: adım 5, 2 resimden 1. Sega Game Gear Screen Replacement: adım 5, 2 resimden 2.

    • Gently open the case by unfolding it over the top of the Sega Game Gear.

    • Do not pull the back of the case away, as cables are connected between both sides.

    Düzenle

  7. Sega Game Gear Screen Replacement: adım 6, 3 resimden 1. Sega Game Gear Screen Replacement: adım 6, 3 resimden 2. Sega Game Gear Screen Replacement: adım 6, 3 resimden 3.

    • Carefully unplug the 2 white-tipped connectors on the top cover.

    Düzenle

  8. Sega Game Gear Screen Replacement, Screen: adım 7, 1 resimden 1.

    • Unscrew all the marked screws.

    Düzenle

  9. Sega Game Gear Screen Replacement: adım 8, 1 resimden 1.

    • Slide the logic board out from under the circular black fastener at the top-left corner of the case.

    Düzenle

  10. Sega Game Gear Screen Replacement: adım 9, 1 resimden 1.

    • Place the board onto a flat surface.

    • Small plastic buttons may fall off during this process, save them in a container or a place where they could be found later on.

    Düzenle

  11. Sega Game Gear Screen Replacement: adım 10, 1 resimden 1.

    • Unscrew the marked screws.

    • Flip the board, having its back facing up.

    • Hold onto the screen in the back, as it will flip open if not held onto.

    Düzenle

  12. Sega Game Gear Screen Replacement: adım 11, 2 resimden 1. Sega Game Gear Screen Replacement: adım 11, 2 resimden 2.

    • Make sure the screen is towards the bottom, as indicated in the second picture.

    Düzenle

  13. Sega Game Gear Screen Replacement: adım 12, 2 resimden 1. Sega Game Gear Screen Replacement: adım 12, 2 resimden 2.

    • Gently open the screen up.

    • The screen will not come out all the way since it is glued onto the top side.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

13 farklı kişi bu kılavuzu tamamladı.

Yazar

5 tane daha katılımcı ile

Lauren Thurston

Üyelik tarihi: 04/15/10

431 İtibar

3 adet Kılavuz yazıldı

Rozetler: 15

+12 tane daha rozet

Ekip

Cal Poly, Team 28-33, Regan Spring 2010 Cal Poly, Team 28-33, Regan Spring 2010 üyesi

CPSU-REGAN-S10S28G33

5 Üyeler

13 adet Kılavuz yazıldı

9 Yorum

any one know where to get a new display that wont bleed me dry?

isaiah bellamy (masta ike) - Yanıt

Due to the nature a Game Gear screen attaches, a ribbon directly soldered to the mainboard, replacing it requires a soldering iron and some fairly advanced technique.

This guide, titled “Sega Game Gear Screen Replacement”, only takes us to the point you remove the ribbon. There is much work left.

Anthony Bessel - Yanıt

so, uh, is there a more comprehensive version somewhere?

rollin -

Does the screen get fixed at the end?

Caedmon O’Brien - Yanıt

SadlySadly, in step 7 you missed a screw location

talliesine - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 7

Son 7 gün: 58

Son 30 gün: 256

Her zaman: 65,026