Eşyalarını Tamir Et Topluluk Mağaza

Sega Master System Model 2 Disassembly

Giriş

In this guide we dissassemble the Sega Master System II

Neye ihtiyacın var

Videoya Genel Bakış

  1. Sega Master System Model 2 Disassembly, The Case: adım 1, 1 resimden 1.

    • Take out the 5 screws at the bottom

    Düzenle

  2. Sega Master System Model 2 Disassembly, RF Shield: adım 2, 1 resimden 1.

    • Remove the 5 screws (3 at the back and 2 on the front)

    • Remove the screw at the side (this screws is different then the other 5 so remember to put them away from the other 5 screws since they are similar)

    • This screw is for the rf shield under for the voltage regulator under this bigger rf shield, its not needed to remove that screw

    Düzenle

  4. Sega Master System Model 2 Disassembly, Cartridge Slot: adım 3, 1 resimden 1.

    • Remove the 2 screws thats holding the cartridge slot down

    Düzenle

  5. Sega Master System Model 2 Disassembly, The End: adım 4, 1 resimden 1.

    • Congratulations! You have opened your Sega Master System Model 2!

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Screenshots taken from a video by Global Garage

3 farklı kişi bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Krisow

Üyelik tarihi: 10/18/17

641 İtibar

2 adet Kılavuz yazıldı

Rozetler: 12

+9 tane daha rozet

3Kılavuz Yorumları

This is in the wrong section.

Owen Ready - Yanıt

Nope, its in the Sega Master System area.

Krisow -

Not a Master System

Chad Luciano - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 8

Son 30 gün: 52

Her zaman: 2,745