Ana içeriğe geç

Seville Classics MSC10166 PCB (Printed Circuit Board) Replacement

Neye ihtiyacın var

  1. Seville Classics MSC10166 PCB (Printed Circuit Board) Replacement, PCB (Printed Circuit Board): adım 1, 1 resimden 1.
    • Use the Phillips #2 screwdriver to remove the four 6 mm screws by unscrewing counterclockwise.

  2. Seville Classics MSC10166 PCB (Printed Circuit Board) Replacement: adım 2, 1 resimden 1.
    • Pull the front and back cover apart.

    • Be careful not to pull the front cover off completely. It holds the wires.

  3. Seville Classics MSC10166 PCB (Printed Circuit Board) Replacement: adım 3, 1 resimden 1.
    • Remove the Phillips 6 mm screw that holds the circuit board to the outer shell of the fan.

    • Shock warning: Make sure the fan is unplugged before removing the circuit board.

  4. Seville Classics MSC10166 PCB (Printed Circuit Board) Replacement: adım 4, 1 resimden 1.
    • Remove the top cover containing the circuit board and the wires by pulling it away from the outer shell of the fan.

  5. Seville Classics MSC10166 PCB (Printed Circuit Board) Replacement: adım 5, 2 resimden 1. Seville Classics MSC10166 PCB (Printed Circuit Board) Replacement: adım 5, 2 resimden 2.
    • Remove the screws from the four corners of the circuit board.

    • Remove the circuit board from the top cover.

    • Do not touch the other side of the circuit board to avoid damaging the circuit elements.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Mateo Begue

Üyelik tarihi: 09/26/12

102 İtibar

2 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 15-46, Forte Fall 2012 Cal Poly, Team 15-46, Forte Fall 2012 üyesi

CPSU-FORTE-F12S15G46

5 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 6

Son 30 gün: 14

Her zaman: 1,484