Eşyalarını Tamir Et Topluluk Mağaza

Shark Cordless Pet Perfect Front Motor Replacement

Giriş

If you are having a problem with your device's Front motor, Here is a Step by step guide to replace a faulty or broken Front motor.

Neye ihtiyacın var

  1. Shark Cordless Pet Perfect Front Motor Replacement, Front Belt: adım 1, 2 resimden 1. Shark Cordless Pet Perfect Front Motor Replacement, Front Belt: adım 1, 2 resimden 2.

    • Remove the two 12mm screws from the front face plate with the PH2 bit from the tool kit.

    Düzenle

  2. Shark Cordless Pet Perfect Front Motor Replacement: adım 2, 3 resimden 1. Shark Cordless Pet Perfect Front Motor Replacement: adım 2, 3 resimden 2. Shark Cordless Pet Perfect Front Motor Replacement: adım 2, 3 resimden 3.

    • Once the screws are removed pull the front face plate off. This will allow access to the belt and motor.

    Düzenle

  4. Shark Cordless Pet Perfect Front Motor Replacement: adım 3, 3 resimden 1. Shark Cordless Pet Perfect Front Motor Replacement: adım 3, 3 resimden 2. Shark Cordless Pet Perfect Front Motor Replacement: adım 3, 3 resimden 3.

    • Lift the brush roller upwards towards you, and the brush roller should come out along with the belt.

    Düzenle

  5. Shark Cordless Pet Perfect Front Motor Replacement: adım 4, 2 resimden 1. Shark Cordless Pet Perfect Front Motor Replacement: adım 4, 2 resimden 2.

    • Remove the belt from the motor mount, and then replace with a new belt.

    Düzenle

  6. Shark Cordless Pet Perfect Front Motor Replacement, Front Motor: adım 5, 2 resimden 1. Shark Cordless Pet Perfect Front Motor Replacement, Front Motor: adım 5, 2 resimden 2.

    • Remove the solder from both motor terminals.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Yazar

5 tane daha katılımcı ile

Ashley Calkins

Üyelik tarihi: 02/02/17

560 İtibar

3 adet Kılavuz yazıldı

Rozetler: 14

+11 tane daha rozet

Ekip

USF Tampa, Team 16-2, Blackwell Spring 2017 USF Tampa, Team 16-2, Blackwell Spring 2017 üyesi

USFT-BLACKWELL-S17S16G2

4 Üyeler

11 adet Kılavuz yazıldı

2 Yorum

Well done, Ashley! You might want to note that using a solder remover is helpful.

Jimbo - Yanıt

Where can I obtain the new motor with the plastic gear?

F V - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 8

Her zaman: 2,620