Eşyalarını Tamir Et Topluluk Mağaza

Shark Flex DuoClean Suction Motor Replacement

Giriş

Following this guide requires cutting wires and soldering. For more information on soldering visit the soldering guide.

Neye ihtiyacın var

  1. Shark Flex DuoClean Suction Motor Replacement, Dust Cup: adım 1, 2 resimden 1. Shark Flex DuoClean Suction Motor Replacement, Dust Cup: adım 1, 2 resimden 2.

    • Squeeze Dust Cup release buttons on either side of the component.

    • Pull up to release Dust Cup.

    Düzenle

  2. Shark Flex DuoClean Suction Motor Replacement, Suction Motor: adım 2, 1 resimden 1.

    • Remove the five 15 mm screws by twisting counterclockwise with a T10 Torx screwdriver.

    Düzenle

  3. Shark Flex DuoClean Suction Motor Replacement: adım 3, 1 resimden 1.

    • Use the iFixit opening tool to remove the top component.

    Düzenle

  5. Shark Flex DuoClean Suction Motor Replacement: adım 4, 1 resimden 1.

    • Remove the two 15mm screws by twisting counterclockwise using the T10 Torx screwdriver.

    Düzenle

  6. Shark Flex DuoClean Suction Motor Replacement: adım 5, 1 resimden 1.

    • Remove the two 15 mm screws by twisting counterclockwise with a T10 Torx screwdriver.

    Düzenle

  7. Shark Flex DuoClean Suction Motor Replacement: adım 6, 1 resimden 1.

    • Remove the two 15 mm screws holding the motor cover by twisting counterclockwise with a T10 Torx screwdriver.

    Düzenle

  8. Shark Flex DuoClean Suction Motor Replacement: adım 7, 1 resimden 1.

    • Cut the zip ties holding the motor using the wire cutter.

    Düzenle

  9. Shark Flex DuoClean Suction Motor Replacement: adım 8, 1 resimden 1.

    • Cut the wires using the wire cutters to completely remove the motor.

    • For reassembly, use the soldering guide in the Introduction.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Christian Fuller

Üyelik tarihi: 10/08/18

420 İtibar

3 adet Kılavuz yazıldı

Rozetler: 11

+8 tane daha rozet

Ekip

Cal Poly, Team S17-G5, White Fall 2018 Cal Poly, Team S17-G5, White Fall 2018 üyesi

CPSU-WHITE-F18S17G5

4 Üyeler

14 adet Kılavuz yazıldı

Bir Yorum

how i need to know how to re connect the wires on replacing a new motor, my model is similar HV321.

andrea - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 10

Son 30 gün: 27

Her zaman: 3,479