Ana içeriğe geç

Giriş

If you need to replace or re-install the accessory hose attachment for your Steam Pocket Mop, this guide will walk you through the process. There are no tools needed to complete this replacement.

  1. Turn off the Steam Pocket Mop and unplug it from the wall. Be sure that any water in the water tank cools before proceeding.
    • Turn off the Steam Pocket Mop and unplug it from the wall.

    • Be sure that any water in the water tank cools before proceeding.

  2. iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now

    iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now
  3. Disconnect the hand-held steamer unit from the main unit. Grip the hand-held steamer and push down on the two release buttons.
    • Disconnect the hand-held steamer unit from the main unit.

    • Grip the hand-held steamer and push down on the two release buttons.

    • Gently pull the unit out in a horizontal motion until it disconnects.

    • When reassembling, be sure to insert the base of the hand-held unit first.

    • If you have any problems with the hand-held steamer locking into place, please consult our Troubleshooting Page.

    • We did not have the accessory hose, which is why it is not pictured.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Rachel Howe

Üyelik tarihi: 17-10-2018

219 İtibar

2 adet Kılavuz yazıldı

Takım

UW Tacoma, Team S1-G3, Rose Fall 2018 UW Tacoma, Team S1-G3, Rose Fall 2018 üyesi

UWT-ROSE-F18S1G3

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 3

Son 30 Gün: 12

Her zaman: 148