Shark Matrix RV2310 Charging Dock Wire Replacement

Giriş

This guide will teach you how to replace the wire on your Shark Matrix RV2310's charging dock. Doing this could potentially fix your device's charging dock not receiving power or other issues involving your charging dock's ability to function.

Neye ihtiyacın var

Adım 1 Charging Dock Wire

Shark Matrix RV2310 Charging Dock Wire Replacement, Charging Dock Wire: adım 1, 3 resimden 1.

Shark Matrix RV2310 Charging Dock Wire Replacement, Charging Dock Wire: adım 1, 3 resimden 2.

Shark Matrix RV2310 Charging Dock Wire Replacement, Charging Dock Wire: adım 1, 3 resimden 3.

Flip the charging dock over and locate the two rubber pads near the front of the device.
These two pads are hiding two screws that are necessary to opening the device.
Using a Jimmy, remove the pads from the device to reveal the screws underneath.

Düzenle

Adım 2

Shark Matrix RV2310 Charging Dock Wire Replacement: adım 2, 3 resimden 3.

Remove the eight 8 mm hex screws necessary to separate the bottom plate from the charging dock.
Remove the plate by pulling it upwards away from the charging dock.

Düzenle