Ana içeriğe geç

Shark Navigator Lightweight Upright Dust Cup Replacement

  1. Shark Navigator Lightweight Upright Dust Cup Replacement, Dust Cup: adım 1, 2 resimden 1. Shark Navigator Lightweight Upright Dust Cup Replacement, Dust Cup: adım 1, 2 resimden 2.
    • Press down on the black, rubber ballish button located on the top of the vacuum.

    • Pull back simultaneous on the plastic handle and remove the dust container.

  2. Shark Navigator Lightweight Upright Dust Cup Replacement: adım 2, 3 resimden 1. Shark Navigator Lightweight Upright Dust Cup Replacement: adım 2, 3 resimden 2. Shark Navigator Lightweight Upright Dust Cup Replacement: adım 2, 3 resimden 3.
    • Press the plastic tab in, located on the front of the dust container.

    • Pull up simultaneously on the plastic handle.

  3. Shark Navigator Lightweight Upright Dust Cup Replacement: adım 3, 2 resimden 1. Shark Navigator Lightweight Upright Dust Cup Replacement: adım 3, 2 resimden 2.
    • Remove the dust cup from the inside of the dust container.

  4. Shark Navigator Lightweight Upright Dust Cup Replacement: adım 4, 3 resimden 1. Shark Navigator Lightweight Upright Dust Cup Replacement: adım 4, 3 resimden 2. Shark Navigator Lightweight Upright Dust Cup Replacement: adım 4, 3 resimden 3.
    • Push in the red tab located on the side of the dust cup.

    • Open the dust cup simultaneously with the cone-half pointing downwards.

    • Separate the two halves.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Kahye Yu

Üyelik tarihi: 10/02/17

446 İtibar

2 adet Kılavuz yazıldı

Ekip

Cal Poly, Team S4-G6, Livingston Fall 2017 Cal Poly, Team S4-G6, Livingston Fall 2017 üyesi

CPSU-LIVINGSTON-F17S4G6

3 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 6

Son 7 gün: 18

Son 30 gün: 86

Her zaman: 3,305