Eşyalarını Tamir Et Topluluk Mağaza

Shark Professional Steam Pocket Mop Head Replacement

Giriş

If you need to replace or re-install the mop head of your Steam Pocket Mop, this guide will walk you through the process. There are no tools needed.

  1. Shark Professional Steam Pocket Mop Head Replacement, Mop Head: adım 1, 2 resimden 1. Shark Professional Steam Pocket Mop Head Replacement, Mop Head: adım 1, 2 resimden 2.

    • Turn off the Steam Pocket Mop and unplug it from the wall.

    • Be sure that any water in the water tank cools before proceeding.

    Düzenle

  3. Shark Professional Steam Pocket Mop Head Replacement: adım 2, 3 resimden 1. Shark Professional Steam Pocket Mop Head Replacement: adım 2, 3 resimden 2. Shark Professional Steam Pocket Mop Head Replacement: adım 2, 3 resimden 3.

    • Push down on the round, grey release button near the connection point, while pulling the mop head out.

    • The mop head should slide out and detach.

    • When reassembling, you should hear it click into place if it is properly installed.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Tyler Wicke

Üyelik tarihi: 10/17/18

237 İtibar

2 adet Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

UW Tacoma, Team S1-G3, Rose Fall 2018 UW Tacoma, Team S1-G3, Rose Fall 2018 üyesi

UWT-ROSE-F18S1G3

4 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 26

Her zaman: 1,854