Shark Professional Steam Pocket Mop Water Tank Cap Replacement

Giriş

Mineral buildup can occur when the water tank cap is not loosened before storing or if the tank is not drained. In these situations the cap can become stuck inside the tank. When this occurs, the cap is often lost or misplaced, which leads to a replacement.

Adım 1 Water Tank Cap

Shark Professional Steam Pocket Mop Water Tank Cap Replacement, Water Tank Cap: adım 1, 2 resimden 1.

Shark Professional Steam Pocket Mop Water Tank Cap Replacement, Water Tank Cap: adım 1, 2 resimden 2.

Turn off the Steam Pocket Mop and unplug it from the wall.
Be sure that the water in the water tank cools to room temperature before proceeding.

Düzenle

Adım 2

Shark Professional Steam Pocket Mop Water Tank Cap Replacement: adım 2, 3 resimden 3.

Remove the water tank cap from the water tank reservoir.
Turn the cap towards the upward position.
Rotate counter-clockwise until it loosens.
When reassembling, align the grooves of new water tank cap with the opening of water tank reservoir and then push in.

Düzenle

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Tyler Wicke

Üyelik tarihi: 10/17/18

237 İtibar

2 adet Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

UW Tacoma, Team S1-G3, Rose Fall 2018 UW Tacoma, Team S1-G3, Rose Fall 2018 üyesi

UWT-ROSE-F18S1G3

4 Üyeler

10 adet Kılavuz yazıldı

12 Yorum

Need a water cap for S3901 N3 11 Shark steam mop. They said they discontinued and I have ordered two online and neither will work. And I really going to have to buy a new one?

shannon poole - 9 Şub 2019 Yanıt