Eşyalarını Tamir Et Topluluk Mağaza

Shark Rocket HV381 Brush Replacement

Giriş

This guide will tell you step by step how to replace a malfunctioning Brush. on the Shark Rocket HV381.

  1. Shark Rocket HV381 Brush Replacement, Brush: adım 1, 2 resimden 1. Shark Rocket HV381 Brush Replacement, Brush: adım 1, 2 resimden 2.

    • On the top of the vacuum head is two grey "Brush Roller Access" buttons. Simultaneously press both buttons to eject the Roller Cover. Remove the Roller Cover by pulling it towards you and up.

    Düzenle

  3. Shark Rocket HV381 Brush Replacement: adım 2, 3 resimden 1. Shark Rocket HV381 Brush Replacement: adım 2, 3 resimden 2. Shark Rocket HV381 Brush Replacement: adım 2, 3 resimden 3.

    • The "Pull Tab" tab is located at the right. Pull the Tab up and to the right for removal.

    • The Brush is sticky so hold the vacuum head with one hand and give the tab a moderate tug.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Dandre Porter

Üyelik tarihi: 08/22/17

528 İtibar

5 adet Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

Arkansas State University, Team S1-G5, Chamberlain Fall 2017 Arkansas State University, Team S1-G5, Chamberlain Fall 2017 üyesi

ARSU-CHAMBERLAIN-F17S1G5

3 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 4

Her zaman: 687