Eşyalarını Tamir Et Topluluk Mağaza

Shark Rotator Lift-Away Speed Brushroll Replacement

Giriş

The brushroll should spin when the vacuum is in carpet mode. If the brushroll indicator light is solid red, there may be a jam in the brushroll. This guide provides instructions on what to do in this situation.

Neye ihtiyacın var

  1. Shark Rotator Lift-Away Speed Brushroll Replacement, Brushroll: adım 1, 1 resimden 1.

    • Make sure the vacuum is turned off and unplugged before proceeding.

    • Locate the release button at the top of the vacuum pod next to the handle.

    • Use the handle to lift the pod up off of the vacuum nozzle while pressing the release button.

    • Removing the pod is optional, but it may be easier to locate blockages or access the motor and belt if you do so.

    Düzenle

  3. Shark Rotator Lift-Away Speed Brushroll Replacement: adım 2, 2 resimden 1. Shark Rotator Lift-Away Speed Brushroll Replacement: adım 2, 2 resimden 2.

    • Press the Brushroll Access buttons on the top of the nozzle to reveal the brushroll compartment.

    Düzenle

  4. Shark Rotator Lift-Away Speed Brushroll Replacement: adım 3, 2 resimden 1. Shark Rotator Lift-Away Speed Brushroll Replacement: adım 3, 2 resimden 2.

    • Lift the brushroll out by using the pull-tab on the left side.

    • You can test the brushroll once it has been inserted by plugging the vacuum in and running the vacuum in carpet mode. The brushroll indicator light should be a solid green color.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Weston Mongomery

Üyelik tarihi: 10/02/17

201 İtibar

2 adet Kılavuz yazıldı

Rozetler: 4

+1 tane daha rozet

Ekip

Cal Poly, Team S15-G7, Livingston Fall 2017 Cal Poly, Team S15-G7, Livingston Fall 2017 üyesi

CPSU-LIVINGSTON-F17S15G7

4 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 5

Son 30 gün: 9

Her zaman: 1,806