Eşyalarını Tamir Et Topluluk Mağaza

Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement

Giriş

This guide will show you how to replace the HEPA filter which is responsible for trapping small particles that can be easily recirculated into the air. When the HEPA Filter is extremely dirty, you may want to consider replacing it.

  1. Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement, HEPA Filter: adım 1, 2 resimden 1. Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement, HEPA Filter: adım 1, 2 resimden 2.

    • Push the red Lift Away button down and lift up on the vacuum handle to detach the base.

    • The handle was removed for convenience but is not required.

    Düzenle

  3. Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement: adım 2, 2 resimden 1. Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement: adım 2, 2 resimden 2.

    • Remove the red cover from the front of the vacuum by pulling the latch found at the bottom of the cover forward and moving the whole cover downward.

    Düzenle

  4. Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement: adım 3, 2 resimden 1. Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement: adım 3, 2 resimden 2.

    • Remove the filter by pulling it straight out.

    • To clean the filter, rinse it under water and allow it to dry before placing it back in the vacuum.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

4 tane daha katılımcı ile

Carson Craft

Üyelik tarihi: 01/24/18

251 İtibar

1 Kılavuz yazıldı

Rozetler: 10

+7 tane daha rozet

Ekip

Cal Poly, Team S19-G3, White Winter 2019 Cal Poly, Team S19-G3, White Winter 2019 üyesi

CPSU-WHITE-W19S19G3

5 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 8

Her zaman: 357